Bradford White Corp Water Heater 705 B User Manual

Commercial Gas Light Duty  
High Input Direct Vent Water Heater  
Features:  
Bradford White is ISO registered to the  
9001 standard.  
9001  
S
T
A
N
D
A
R
D
I 1" Non-CFC foam insulation—surrounds the tank surface, saving  
energy by retarding loss of heat.  
I Closed combustion—all air for combustion is taken directly from the  
outside. The co-axial vent pipe (pipe inside a pipe) draws combustion  
air in through the outer pipe (6"), and exhausts the products of  
combustion through the inner pipe (4").  
I Co-axial—rotational venting at top of unit.  
I No electrical power necessary.  
I Piezo igniter—for ease of lighting the pilot.  
I Water Connections—3/4" NPT factory installed true dielectric fittings.  
Extends water heater life and eases installation.  
®
I Vitraglas lined tank—Bradford White water heater tanks are  
protected from the corrosive effects of hot water by an exclusive  
ceramic porcelain-like coating. The Bradford White high silica Vitraglas®  
lining provides a tough interior surface for our water heater tanks.  
®
I Factory installed Hydrojet Total Performance System—cold inlet  
sediment reducing device. Helps prevent sediment build up in tank.  
Increases first hour delivery of hot water while minimizing temperature  
build up at top of tank.  
I Protective magnesium anode rod—provides added protection  
against corrosion for long trouble-free service.  
I Brass drain valve.  
I T&P relief valve—factory installed.  
I Side Tappings—for space heating purposes.  
I Fully automatic controls—automatic temperature selection at your  
fingertips. Built-in energy cut-off switch prevents abnormally high water  
temperature for extra safety. Built-in gas pressure regulation. Fast-  
acting thermostat starts heat recovery cycle sooner.  
I NSF construction available.  
I Optional vent kits—allow for up to 8 foot max vertical and 8 foot max  
horizontal (2.4 meters)). All DH models must be terminated horizontally.  
I Three year limited warranty on steel tank—heavy gauge steel  
automatically formed, rolled and welded to assure a continuous seam  
for glass lining.  
I One year limited warranty on parts.  
I Design certified by CSA International. (formerly AGA and CGA)  
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492;  
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879;  
5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448;  
4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re.  
34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:  
1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.5.  
 

Black Decker Cordless Drill 90506902 User Manual
Bryant Gas Heater 344 User Manual
Bush Hog Compact Loader 2247QT User Manual
Bushnell Film Camera VLR II User Manual
Campbell Hausfeld Pressure Washer PW2725 User Manual
Cannon Camcorder XL H1 a User Manual
Canon Projector LV X300 User Manual
Casio Laptop 10M30BR User Manual
Chauvet Marine Lighting LEDrain 38c User Manual
Chromalox Air Conditioner PF490 5 User Manual